8
Install an optional duplex unit
Step 4: Install an optional duplex
unit
CAUTION! If you are installing a duplex
unit sometime after setting up the printer,
turn the printer off and unplug the power
cord before continuing.
Your printer supports an optional duplex
unit that lets you print on both sides of a
sheet of paper.
Note: You need a small Phillips
screwdriver to install the duplex unit.
1 Unpack the duplex unit and
remove any packing material.
2 Use the special tool packed with
the duplex unit to remove the two
duplex covers on the back of the
printer.
To Next Page
Loading...
