23
Load paper
3 Flex the sheets back and forth to
loosen them, and then fan them.
Do not fold or crease the paper.
Straighten the edges of the stack
on a level surface.
4 Insert the paper, print side up, into
the multipurpose feeder until it
touches the insertion point.
Do not force the paper.
Warning! Do not exceed the maximum
stack height indicated on the feeder.
Overfilling the feeder may cause jams.
5 Select the paper size, paper type,
and paper source from the
operator panel.
You will also need to select the
paper size, type, and source from
your software application when
you send a job to print.
What do I do next?
Task Go to page…
Install memory, firmware, or option cards 24
Attach cables 34
To Next Page
Loading...
