31
Install memory, firmware, or option cards
Warning! Option cards are easily
damaged by static electricity. Touch
something metal on the printer before
you touch a card.
3 Unpack the option card.
Save the packing materials.
4 Align the connector on the option
card with the connector on the
system board.
The cable connectors on the side
of the option card must fit through
the connector slot.
5 Push the option card firmly into
the option card connector.
6 Secure the card to the system
board with the screw.
What do I do next
Task Go to page…
Reinstall the system board access panel 32
To Next Page
Loading...
