Clearing print media jams
Paper handling
Maintenance
Troubleshooting
Administration
Index
79
Printing
www.lexmark.com
Lexmark W820
The print media exits to bin 2, but there is not enough to grasp from the bin:
1 Open the finisher door (Door K).
2 Locate the right green knob above the stapler and turn it in the direction of the arrow.
More of the print media moves to the bin.
3 Pull the print media out of the bin. If the print media does not release easily, complete
step1onpage80to step2onpage80, and then close the finisher door (Door K).
To Next Page
Loading...
