Lexmark X125 - Loading a Document

Basics
Copying
Printing
Scanning
Faxing
Troubleshooting
15
Basics
Index
www.lexmark.com
Lexmark X125
Loading a document
To load documents for copying, scanning, and faxing:
1 Place your document face down and top down in the document support.
Document Loaded appears on the operator panel display.
2 Slide the document guides until they rest against both edges of your document.
3 When copying, scanning, or faxing documents using your All-In-One, make sure:
– Your document is at least 76 mm (3.0 in.) long and 140 mm (5.5 in.) wide.
– You remove all staples and paper clips.
– You let ink and correction fluid dry completely.