Lexmark X125 - Scan to Application

Scanning
Copying
Printing
Scanning
Faxing
Troubleshooting
50
Basics
Index
www.lexmark.com
Lexmark X125
Scanning to an application
1 Load the document. For help, see page 15.
2 Click Start Programs Lexmark X125 Lexmark X125 Settings Utility.
3 To customize the settings from the Settings Utility, click scan.
4 Customize a scan-to destination:
– Enter a Display Name.
– Enter an application to scan to in the Application box.
5 From the application list, select the program you want to scan to.
6 Select the file type you want to scan to.
7 Click OK.
8 Press Scan on the operator panel.
9 Press Start/Yes.