Lexmark X125 - Customizing Scan Settings

Scanning
Copying
Printing
Scanning
Faxing
Troubleshooting
46
Basics
Index
www.lexmark.com
Lexmark X125
Customizing the scan settings
Use the operator panel or the software to change the scan type, contrast, size, and file type:
Using the operator panel... Using the software...
1 Press Scan, and then press Menu
repeatedly to review the settings.
2 Press Options to change the settings.
1 Make sure you have installed the All-In-One
software. For help, refer to the Quick
Reference.
2 Click Start Programs Lexmark
X125 Lexmark X125 Settings Utility.
3 Click scan.
4 Adjust the settings, and then click OK.