Lexmark X125 - Troubleshooting; General Problems

Troubleshooting
Copying
Printing
Scanning
Faxing
Troubleshooting
70
Basics
Index
www.lexmark.com
Lexmark X125
When the All-In-One has a problem, first make sure:
• The power cord is plugged into your All-In-One and into a properly grounded electrical
outlet.
• Your telephone cord is securely attached to the LINE outlet and to the telephone wall
jack.
• Your telephone has a dial tone.
• The operator panel and the cartridge access door are completely closed.
• Ready appears on the display.
• The sticker and transparent covering the bottom of the cartridges are removed.
• The USB cable is securely attached to the computer and to the All-In-One.
• The paper is loaded correctly.
If you are still experiencing a problem, click the topic that matches the problem you are
having.
• General problems
• Fax problems
• Operator panel display error messages
• Cartridge maintenance