Lexmark X2450 - Printer Operations and Features; Checking Printer Status; Using the Control Panel; Printing Documents and Projects

2
If the printer software installation screen does
not appear:
a From the desktop, double-click My
Computer.
For Windows XP, click Start to access the
My Computer icon.
b Double-click the CD-ROM drive icon. If
necessary, double-click setup.exe.
c When the printer software installation
screen appears, click Install or
Install Now.
d Follow the instructions on the computer
screen to complete the installation.
Checking the printer status
1 Click Start Æ Settings Æ Printers and Faxes
or Printers.
or
Click Start Æ Control Panel Æ Printers and
Other Hardware Æ Printers and Faxes.
2 Double-click the Lexmark 2400 Series icon.
3 Click Printer, and make sure no check mark
appears next to Pause Printing.
4 Make sure a check mark does appear next to
Set As Default.
Finding more
information
• See the complete User’s Guide on the CD.
Click Start Æ Programs or All Programs Æ
Lexmark 2400 Series Æ User’s Guide.
• Visit our Web site:
http://support.lexmark.com/.
Using the control panel Printing
Printing a document
1 Load paper.
2 With the document open, click File Æ Print.
3 Click Properties, Preferences, Options, or
Setup.
4 Adjust the settings.
5 Click OK.
6 Click OK or Print.
Printing other projects
The “I Want To” menu provides wizards for creating
projects. You can print a photo, print on an
envelope, print a banner, make a poster, create a
booklet, or print a greeting card.
1 With the document open, click File Æ Print.
2 Click Properties, Preferences, Options, or
Setup to customize print settings.
The Print Properties dialog appears along with
the “I Want To” menu.
3 Select one of the available projects, or click
See more printing ideas.
4 Follow the instructions on the computer screen
to complete the project.
Use this
button
To
1 Make a color copy.
2 Make a 4 x 6 borderless, color
copy of a photo.
3 • Open the All-In-One Center
to preview the scan on the
computer screen.
• Initiate scan-back alignment
if the button is held down for
three seconds.
4 • Turn the printer on or off.
• Cancel a print job.
• Reset the printer.
Note: If the power light blinks,
see “Error messages” in the
User’s Guide on the CD.
2
1