Lexmark X422 - Page 266

PostScript
4-92
TokenTalkType string Setting this variable does not affect the value of other physical internal print servers.
Note: The statusdict string appletalktype is correct for the current job port.
Type name (Read-only) Always returns the value of /Communications.
Zone string Returns the value identified when the printer makes connection to the network at power on.
Device Parameters for the Communication Device %AppSocket%, %AppSocketA%, %AppSocketB%, %AppSocketC%,
%AppSocketD%
(%AppSocket_NV% and %AppSocket_Pending% contain the same parameters)
DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are:
True An end-of-file message is not sent until the current job and all preceding jobs
finish printing.
False An end-of-file message is sent as soon as a job finishes executing in the
interpreter, whether or not that job has finished printing.
This value is set independently for each port.
Enabled boolean (Read-only)
Supported values are:
Tru e
False
Filtering name Indicates if the input needs further filtering before the data can be correctly processed.
Supported values are:
InterpreterBased
None
HasNames boolean (Read-only) Always returns False.
Interpreter name (Read-only)
Supported values are:
PostScript
AutoSelect
PCL
PPDS
On boolean Designates if the communication channel is On and able to receive and send data.
Supported values are:
True Data is sent and processed.
False Data is lost.
PortLocation string (Read-only) Designates the physical location of the port related to the parameter set.
Supported values are:
Standard Port
Option Slot 1
Option Slot 2
Option Slot 3
Type name (Read-only) Always returns the value of /Communications.
Table 4-15: PostScript Emulation Device Parameters (Continued)
Key Type Definition