Specifications
7-2
Electrical Specifications
Warning: Lexmark recommends that you do not use voltage converters with printers.
Power Requirements
The following tables list the nominal average power requirements (including fuser
power).
Table 7-2: Printer Electrical Specifications
Printer Model Electrical Specification
C510(n) (100 volt model) 100 V at 50/60 Hz
C510(n) (low voltage model) 110
–127 V at 50/60 Hz
C510(n) (high voltage model) 220
–240 V at 50/60 Hz
X422 (low voltage model) 100
–127 V at 50/60 Hz
X422 (high voltage model) 220–240 V at 50/60 Hz
Table 7-3: Power Requirements
Printer Model C510
1
X422
State 100 V 120 V 230 V 120 V 230 V
Average continuous
printing
550 W
mono
370 W
color
550 W
mono
370 W
color
550 W
mono
370 W
color
430 W 430 W
Average continuous
copying
———475 W 475 W
Average continuous
scanning
———125 W 125 W
Idle without Power Saver
(Standby)
150 W 150 W 150 W 75 W 75 W
Idle with Power Saver 12 W 12 W 12 W 22 W
2
22 W
2
Rated short term current 8.1 A 7.2 A 2.83 A 8.8 A 4.1 A
1
Power requirements for network models may differ.
2
This value is <19 W for units manufactured after 4/30/2004.
To Next Page
Loading...
