Lexmark X422 - Page 322

Interfaces
8-20
AUTOFD* Receiver for the Lexmark C510
The following diagram illustrates the AUTOFD* receiver for the Lexmark C510.
DATA 1-8 Signal Driver/Receivers for the Lexmark C510
The following diagram illustrates each of the DATA 1-8 signal driver/receivers for the
Lexmark C510.
FCT 2827
620 pF ±10%
+5V, 5%
GND
Connector
Pin
39 ohm ±5%
2.2K ohm ±10%
FCT 2828
or
FCT 2245
150 pF ±20%
+5V, 5%
GND
Connector
Pin
33 ohm ±5%
2.2K ohm ±10%