IPDS MENU
9 EMULATION
PAPER HANDLING
MAP INPUT TRAYS
3. Press or to scroll further until 9 is next to the item you need. Press .
In the following example, you select an option called Host Resolution.
EMULATION
IPDS Emulation
9 Host Resolution
Color Processing
4. Press
or to scroll further until 9 is next to the item you need. Press .
In the following example you select an option setting – “300 dpi” – in the following manner:
The * (asterisk) beside Auto means that Auto is the currently active setting. (It also happens to be
factory default in this example.) Scroll so that
9 is next to 300 dpi and press .
Host Resolution
* Auto
9 300 dpi
240 dpi
5. While the printer is saving the setting, it will display Submitting Selection.
6. When the setting is saved, the display will revert to the previous menu level.
EMULATION
IPDS Emulation
9 Host Resolution
Color Processing
If you want to check the value of the setting, press again. You will see an asterisk * beside the
currently active setting; in this example “300 dpi”.
Press the Back button in order to leave the screen without changing the setting.
7. If you need to make additional settings within the same menu – such as EMULATION, scroll
through the list. To reach another menu, such as MAP OUTPUT BINS, press .
12
To Next Page
Loading...
