Lexmark X466 Installation And Administration Guide

7 A message will be displayed asking you to confirm the action: Contents will be lost. Continue?
• Select Yes to proceed with disk wiping and encryption. A status bar will indicate the progress of the encryption
task.
After the disk has been encrypted, the MFP will return to the Enable/Disable screen.
Warning: Do not power off the device during the encryption process. Doing so may result in loss of data.
Note: Disk encryption can take several hours to complete.
8 To finish, press Back, and then Exit Config Menu.
The MFP will power-on reset, and then return to normal operating mode.
Disabling the USB Buffer
Disabling the USB buffer disables the USB host port on the back of the device.
1 From the home screen, touch Menus > Network/Ports > Standard USB.
2 Scroll to the left to set the USB Buffer to Disabled.
3 Touch Submit.
Overview and first steps
8
8

Lexmark X466 Specifications

General

Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, Mac, Linux
Print Technology	Laser
Duplex Printing	Yes
Connectivity	USB, Ethernet
Paper Handling	250-sheet input tray, 50-sheet multipurpose tray
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 1200 dpi
Type	Multifunction
Paper Capacity	300 sheets
Maximum Paper Size	8.5 x 14 inches