Printer specifications
Airflow requirement
The room should meet ASHRAE 62—1989 standards.
Noise emission levels
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Status
X548de, X548dte
Declared sound pressure level, dBA Declared sound power level, bels
ADF color copy 51 6.5
ADF color scan 45 6.2
ADF mono copy 50 6.5
ADF mono scan 46 6.2
Duplex printing (color) 50 6.6
Duplex printing (mono) 49 6.5
Idle (standby mode) 23 3.8
Quiet mode duplex color printing 48 6.3
Quiet mode duplex mono printing 47 6.4
Quiet mode simplex color printing 46 6.3
Quiet mode simplex mono printing 46 6.4
Simplex printing (color) 48 6.4
Simplex printing (mono) 47 6.3
Note: Measurements apply to 300‑dpi, 600‑dpi, and 1200‑IQ printing.
Electrical specifications
Printer model Electrical specification
X548 MFP low‑voltage models 100–127 V (100–110 V Japan) at 50–60Hz, nominal
90–137 V (90–110 V Japan), extreme
X548 MFP high‑voltage models 220–240 V at 50–60Hz, nominal (available only in some countries)
198–259 V, extreme
Warning—Potential Damage: Do not use voltage converters with printers.
Printer specifications 18
To Next Page
Loading...
