Lexmark X792de - Fax Settings Menu

Menu item Description
Contrast
Best for content
0–5
Specifies the contrast used for the copy job
Note: Best for content is the factory default setting.
Mirror Image
Off
On
Creates a mirror image of the original document
Note: Off is the factory default setting.
Negative Image
Off
On
Creates a negative image of the original document
Note: Off is the factory default setting.
Shadow Detail
‑4 to 4
Adjusts the amount of shadow detail visible on a copy
Note: 0 is the factory default setting.
ADF Skew Fix
Off
On
Lets you fix slight skew on the scanned image
Note: Off is the factory default setting
Scan edge to edge
Off
On
Specifies if the original document is scanned edge-to‑edge
Note: Off is the factory default setting.
Sharpness
1–5
Adjusts the amount of sharpness of a copy
Note: 3 is the factory default setting.
Temperature
‑4 to 4
Enables the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer
output than the default, while “warm” values generate a redder output than the
default.
Sample Copy
Off
On
Creates a sample copy of the original document
Note: Off is the factory default setting.
Fax Settings menu
Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job by way of a telephone line.
General Fax Settings
Menu item Description
Fax Name or Station Name Specifies the name of the fax in the printer
Fax Number or Station Number Specifies a number associated with the fax
Station ID
Fax Name or Station Name
Fax Number or Station Number
Specifies how the fax is identified
Understanding printer menus 194