Lexmark X792de - Reattach bin [X]; Reattach bin [X] - [Y]

Touch Continue to clear the message without printing. Held faxes will attempt to print after the printer has been
restarted.
Reattach bin [x]
Try one or more of the following:
• Turn the printer off and then back on.
• Reattach the specified bin:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the specified bin.
4 Reattach the bin.
5 Connect the power cord to a properly grounded electrical outlet.
6 Turn the printer back on.
• Remove the specified bin:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the specified bin.
4 Contact Customer Support.
• Touch Continue to clear the message and print without using the specified bin.
Reattach bin [x] – [y]
Try one or more of the following:
• Turn the printer off and then back on.
• Reattach the specified bins:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the specified bins.
4 Reattach the bins.
5 Connect the power cord to a properly grounded electrical outlet.
6 Turn the printer back on.
• Remove the specified bins:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the specified bins.
4 Contact Customer Support.
• Touch Continue to clear the message and print without using the specified bins.
Troubleshooting 276