Lexmark X792de - Load Manual Feeder with [Custom Type Name]; Load Manual Feeder with [Custom String]; Load Manual Feeder with [Paper Size]; Load Manual Feeder with [Paper Type] [Paper Size]

Load Manual Feeder with [custom type name]
Try one or more of the following:
• Load the specified paper in the manual feeder.
• Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
• Touch Automatically select paper to use the paper loaded in the tray.
• Cancel the print job.
Load Manual Feeder with [custom string]
Try one or more of the following:
• Load the specified paper in the manual feeder.
• Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
• Touch Automatically select paper to use the paper loaded in the tray.
• Cancel the print job.
Load Manual Feeder with [paper size]
Try one or more of the following:
• Load the specified paper in the manual feeder.
• Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
• Touch Automatically select paper to use the paper loaded in the tray.
• Cancel the print job.
Load Manual Feeder with [paper type] [paper size]
Try one or more of the following:
• Load the specified paper in the manual feeder.
• Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
• Touch Automatically select paper to use the paper loaded in the tray.
• Cancel the print job.
Load staples
Try one or more of the following:
• Replace the specified staple cartridge in the finisher.
• Touch Continue to clear the message and continue printing.
Note: The print job will be stapled if the staple cartridge is replaced or inserted.
• Touch Cancel job to cancel the print job.
Memory full, cannot print faxes
There is not enough memory to print the fax job.
Troubleshooting 275