Paper jam under the fuser
1 Open the side door of the printer.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2 If paper is visible under the fuser, then firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3 Close the side door of the printer.
4 From the printer control panel, touch Continue, jam cleared.
230 paper jam
1 Open the side door of the printer.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2 Slide the latch to open the duplex cover.
1
2
3 Grasp the jammed paper, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4 Close the duplex cover.
5 Close the side door of the printer.
6 From the printer control panel, touch Continue, jam cleared.
Clearing jams 261
To Next Page
Loading...
