Lexmark X792de - Supported Paper Types and Weights; Supported Finishing Features

Supported paper types and weights
The printer supports 60–176 g/m
2
(16–47 lb) paper weights for one‑sided printing. Two‑sided printing is supported on
64–176 g/m
2
(17–47 lb) paper weights.
Note: Labels, transparencies, envelopes, and card stock always print at reduced speed.
Paper type Standard
550‑sheet tray
(Tray 1)
Optional
550‑sheet tray
Optional
2,000‑sheet tray
Multipurpose
feeder
Duplexer
Paper
• Plain
• Recycled
• Glossy
• Heavy Glossy
• Bond
• Letterhead
• Preprinted
• Colored
• Light
• Heavy
• Rough/Cotton
• Custom Type [x]
Card stock X
Transparencies
1, 2
XXX X
Labels
3
• Paper
• Vinyl
X
Envelopes
4
XXX X
1
This media is supported only in the multipurpose feeder.
2
Do not use inkjet or 3M CG3710 transparencies.
3
Paper labels are supported. Other media such as vinyl may show print quality defects in some environments, and prolonged
vinyl label usage may reduce fuser life. For more information, see the Card Stock & Label Guide available on the Lexmark
Web site at http://support.lexmark.com.
4
Use envelopes that lie flat when individually placed facedown on a table.
Supported finishing features
The printer supports the following finishing features:
• 500‑Sheet Offset Stacker
• 500-Sheet Staple Finisher
Paper and specialty media guidelines 90