Menu item Description
Content Source
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Black and White Laser
Specifies the source of content in the scan job
Notes:
• Color Laser is the factory default setting. Color Laser is used when the original
document was printed using a color laser printer.
• Black and White Laser is used when the original document was printed using a
mono laser printer.
• Inkjet is used when the original document was printed using an inkjet printer.
• Photo/Film is used when the original document is a photo from film
• Magazine is used when the original document is from a magazine.
• Newspaper is used when the original document is from a newspaper.
• Press is used when the original document was printed using a printing press.
• Other is used when the original document was printed using an alternate or
unknown printer.
Color
On
Off
Specifies whether or not copies are printed in color
Note: On is the factory default setting.
Resolution
150 dpi
200 dpi
300 dpi
400 dpi
600 dpi
75 dpi
Specifies the resolution of the scan in dots per inch (dpi)
Note: 150 dpi is the factory default setting.
Darkness
1–9
Lightens or darkens the output
Note: 5 is the factory default setting.
Orientation
Portrait
Landscape
Specifies the orientation of the scanned image
Note: Portrait is the factory default setting.
Understanding printer menus 216
To Next Page
Loading...
