Lexmark X83 - Page 30

Copying
Copying
Printing
Scanning
Troubleshooting
Appendix
30
Basics
Index
www.lexmark.com
Lexmark X83
Copying receipts
Note: If you have lightly printed receipts, you can use the lighter/darker option of
the operator panel or the Scan & Copy Control Program.
Using the operator panel: Using the computer:
1 Make sure the printer is on.
2 Open the top cover.
3 Place the receipt face down on the scanner
bed in the bottom, right corner.
4 Close the top cover.
5 Press Black Copy.
1 Make sure the printer
and the computer are
turned on.
2 Open the top cover.
3 Place the receipt face
down on the scanner
bed in the bottom, right corner.
4 Close the top cover.
5 Click Start Programs Lexmark X83
Scan & Copy Control Program.
6 Click Copy.