Lexmark X83 - Page 31

Copying
Copying
Printing
Scanning
Troubleshooting
Appendix
31
Basics
Index
www.lexmark.com
Lexmark X83
Cloning seed packets to label garden rows
Cut out each image and attach to an object that can be inserted into the ground.
Note: If you plan on using the images outdoors, you may want to laminate them.
Using the operator panel: Using the computer:
1 Make sure the printer is on.
2 Open the top cover.
3 Place the seed packet face down on the
scanner bed in the bottom, right corner.
4 Close the top cover.
5 Press the Menu button until Clone appears
on the display and press Select.
6 Use until the desired number of
images (4, 9, or 16) appears on the display.
7 Press Select.
8 Press Color Copy or Black Copy.
1 Make sure the printer
and the computer are
turned on.
2 Open the top cover.
3 Place the seed packet
face down on the
scanner bed in the bottom, right corner.
4 Close the top cover.
5 Click Start Programs Lexmark X83
Scan & Copy Control Program.
6 From the Fit to Page area, select Clone.
7 Select 2, 3, 4, or 8 images.
8 Select the Color, Gray, or B/W button.
9 Click the Copy Button.
or