Lexmark X85 - Using the Operator Panel Buttons; Using the Scan & Copy Control Program

8
Using the operator panel buttons
Using the Scan & Copy Control Program
When the software is installed on your computer, you can use the
Scan & Copy Control Program to customize scan, print, and copy jobs. To
open the Scan & Copy Control Program:
1 Click Start Programs Lexmark 85 Scan & Copy Control
Program.
2 Click File Setup to make additional changes to your documents.
# Press… When you want to…
1 Number
of Copies
Select the number of copies.
2 Reduce/
Enlarge
Make a copy smaller or larger than the original.
3 Scroll left or right through items on the display.
4 Menu Change settings using the printer menus.
5Color
Copy
Make a color copy.
6 Quality Adjust the copy quality.
7 Scan To Scroll through a list of scan destinations on the display.
8 Cancel Cancel a scan or copy job, or return a menu item to its default
setting.
9 Lighter/
Darker
Make the copy lighter or darker than the original.
10 Paper
Ty pe
Select a paper type.
11 Select Choose the displayed selection.
12 Black
Copy
Make a black and white copy.
13 Scan Initiate a scan to your currently selected scan destination.
14 Power Turn your printer on or off.
or