Lexmark X85 - Uninstalling Software; Installing the Software; Faxing Problems

20
Uninstalling software
1
Disconnect the USB cable.
2 Click Start Programs Lexmark X85 Uninstall.
3 Follow the instructions on your computer screen to uninstall the
printer software.
4 Restart the computer.
Installing the software
Windows users:
1 Disconnect the USB cable.
2 Insert the Lexmark X85 CD to reinstall the software.
3 Follow the instructions on your computer screen.
Note: Do not connect the USB cable until you are prompted by
the CD software.
Faxing problems
If you are having problems sending or receiving faxes, make sure:
• You have an operational fax modem installed on your computer.
• You have installed the fax software included on CD 2.
• The fax driver you want to use is set as the default fax driver in the
Scan & Copy Control Program.
To check or select your default fax driver:
1 Click Start Programs Lexmark X85 Scan & Copy Control Program.
2 Click File Setup, and then select the Copy/Fax tab.
If the fax driver you want to use as your default is not listed:
1 Click Fax Setup.
2 From the list, select the fax driver you want to use as your default.
3 Click Select.