ENERGY STAR
Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply
with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.
Temperature information
Ambient temperature 15.6 to 32.2°C (60 to 90°F)
Shipping and storage temperature ‑40°C to 40°C (104° Fahrenheit) and 0°C to 35°C (95° Fahrenheit)
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard‑copy output from
electronic inputs.
675 W (x950de) ; 710 W (x952de and x952dte) ;
750 W (x954de and x954dhe)
Copy The product is generating hard‑copy output from
hard‑copy original documents.
810 W (x950de) ; 830 W (x952de and x952dte) ;
850 W (x954de and x954dhe)
Scan The product is scanning hard‑copy documents. 125 W (x950de) ; 130 W (x952de and x952dte) ;
135 W (x954de and x954dhe)
Ready The product is waiting for a print job. 110 W (x950de) ; 115 W (x952de and x952dte) ;
120 W (x954de and x954dhe)
Sleep Mode The product is in a high‑level energy‑saving mode. 17 W
Hibernate The product is in a low‑level energy‑saving mode. 1.0 W
Off The product is plugged into a wall outlet, but the power
switch is turned off.
0.35 W
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Notices 351
To Next Page
Loading...
