3
Unlock the length guide, and then squeeze and slide the guide
to the correct position for the size of the paper being loaded.
Notes:
•
Lock the length guide for all paper sizes.
•
Use the paper size indicators on the bottom of the tray
to help position the guides.
4
Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the paper. Straighten the edges on
a level surface.
5
Load the paper stack with the printable side facedown.
Note: Make sure the paper or envelope is loaded properly.
•
There are dierent ways for loading letterhead depending
on whether an optional staple
finisher
is installed or not.
Without an optional staple
finisher
With an optional staple finisher
ABC
One‑sided printing
ABC
One‑sided printing
ABC
Two‑sided printing
ABC
Two‑sided printing
•
If you are loading prepunched paper for use with the staple
finisher, then make sure the holes on the long edge of the
paper are on the right side of the tray.
One‑sided printing Two‑sided printing
ABC
ABC
Note: If the holes on the long edge of the paper are on
the left side of the tray, then a jam may occur.
7
To Next Page
Loading...
