Lexmark XM7170 - Page 91

Paper size 4‑bin mailbox Oset stacker Staple finisher Staple, hole punch
finisher
Statement
2 2
Universal
4 3,4
1
The finisher staples the paper if it is loaded long edge first.
2
The finisher stacks the paper but does not staple or punch holes in it.
3
The finisher stacks and staples the paper but does not punch holes in it.
4
The
finisher
staples the paper if its width is from 210 mm (8.27 in.) to 217 mm (8.54 in.) and its length is from 210 mm
(8.27 in.) to 356 mm (14 in.).
Supported paper types and weights
Paper type Paper weight 4‑bin mailbox Oset stacker Staple finisher Staple, hole
punch finisher
Plain paper
90–176 g/m
2
(24–47 lb bond)
XX X X
60–90 g/m
2
(16–24 lb bond)
Card stock
163 g/m
2
(90 Ib index)
X
1 1
199 g/m
2
(110 Ib index)
XX X X
Transparency
2
146 g/m
2
(39 Ib bond)
X
1 1
Recycled
90–176 g/m
2
(24–47 lb bond)
XX X X
60–90 g/m
2
(16–24 lb bond)
3
Paper labels
180 g/m
2
(48 Ib bond)
X
XX
Dual web and
Integrated
180 g/m
2
(48 Ib bond)
X
XX
Bond
90–176 g/m
2
(24–47 lb bond)
XX X X
60–90 g/m
2
(16–24 lb bond)
1
The finisher stacks the paper but does not staple or punch holes in it.
2
Print transparencies in batches of only up to 20 to prevent them from sticking together. For more information, see
“Tips on using transparencies” on page 85.
3
Set the paper type to Paper or Rough/Cotton.
Paper and specialty media guide 91