COMFORT ADJUSTMENT
124
When you are backing up, you can adjust the mirrors
down quickly by the following operations with the ignition
ON.
Put the selector lever in the “R” position.
Place the master switch at “L” (left) or “R” (right).
The mirrors return to the previous position by any of the
following operations.
Put the selector lever in a position other than ”R”.
Place the master switch in the neutral position.
Turn the ignition switch to the ”ACC” position.
NOTICE
If ice should jam the mirror, do not operate the control
or scrape the mirror face. Use a spray de–icer to free the
mirror.
Folding and extending automatic rear view
mirrors
16L418a
With the rear view mirror folding switch in the “AUTO”
position:
When you turn the ignition switch to “ACC” or “ON” position,
the folded rear view mirrors are automatically extended.
When you turn the ignition switch to “LOCK” position, the
rear view mirrors are automatically folded.
The rear view mirrors can be folded or extended manually.
CAUTION
To avoid personal injury and mirror malfunction, do
not touch the mirror while it is moving.
Do not drive with the mirrors folded backward. Both
the driver and passenger side rear view mirrors must
be extended and properly adjusted before driving.
To Next Page
Loading...
