Lexus 2003 LS - Garage Door Opener

INTERIOR EQUIPMENT
78
GARAGE DOOR OPENER
The garage door opener (HomeLink

Universal
Transceiver) is manufactured under license from
HomeLink

and can be programmed to operate garage
doors, gates, entry doors, door locks, home lighting
systems, and security systems, etc.
(a) Programming the HomeLink

14L070

1
Buttons
2
Indicator light
The HomeLink

in your vehicle has 3 buttons and you can
store one program for each button.
To ensure correct programming into the HomeLink

, install a
new battery in the hand–held transmitter prior to programming.
The battery side of the hand–held transmitter must be pointed
away from the HomeLink

during the programming process.
For Canadian users, follow the procedure in “Programming an
entrance gate/Programming all devices in the Canadian
market”.
1. Decide which of 3 HomeLink

buttons you want to program.
2. Place your hand–held garage transmitter 25 to 75 mm (1 to
3 in.) away from the surface of the HomeLink

.
Keep the indicator light on the HomeLink

in view while
programming.
3. Simultaneously press and hold the hand–held garage
transmitter button along with the selected HomeLink

button.
4. When the indicator light on the HomeLink

changes from a
slow to a rapid flash after 20 seconds, you can release both
buttons.
5. Test the operation of the HomeLink

by pressing the newly
programmed button. If programming a garage door opener,
check to see if the garage door opens and closes.