Section 3
21
This represents a total of 3 separate memory dials that are
available. The telephone computer captures 3 numbers based
on the phone entry. For example, speed dial memory entry
number 1, 2 or 3 can be accessed from the command module.
However, speed dial entries other than the 3 numbers are not
accessible through the command module.
NOTICE
Before using the speed dial function you must first transfer your
phone’s speed dial memory to the system. (Refer to pages
26–29.)
INFORMATION
The #1 speed dial is reserved on the phone for your personal
voice mail.
Receiving a Call
Command Module
When a call is received the system notifies you by ringing in
the speakers. To answer the call, press the hook key on the
command module and the telephone computer will receive the
call. Once the call is received, the hook key, if pressed again,
will terminate the call.
Automatic Answering
The automatic answer feature is an option that can be set di-
rectly from your phone. This feature answers any call received
automatically.
INFORMATION
The automatic answer feature will operate even when you are
out of the vehicle.
To Next Page
Loading...
