Using the Lexus Integrated Mobile Phone
System in Vehicles equipped with Navi-
gation
Section 3
24
NOTICE
When the ignition switch is turned OFF from the ACC position,
the registered outgoing log data will be erased by the telephone
computer. The outgoing log data which enabled the connection
to the network will be maintained in the outgoing log of the
phone.
3. Setup
This option will display the Telephone Setup screen. This
screen allows you to add personal preferences to the system
and transmit phone book memory.
4. Direct Dial
From this screen you can enter a number into the system
using the console display keypad.
Enter the desired phone number, including area code, and
touch
on the console display or press the hook key on the command
module.
INFORMATION
Touching
on the console display will remove a single entered
digit. To remove an entire series of numbers, touch and hold
.
In out–of–service areas, or while placing numbers forbidden by
the security, the call cannot be established even though it is
displayed on the Dialing screen. Touch
on the display and
return to the screen viewed before using the hands free mode.
To Next Page
Loading...
