108
ES350_300h_OM_OM33A60U_(U)
2. Instrument cluster
■ Setting display automatic cancelation
In the following situations, setting display in which the settings can be changed
through the “DISP” button will automatically be turned off.
● When a warning message appears while the setting display is displayed
● When the vehicle begins to move while the setting display is displayed
■ Tire inflation pressure
● It may take a few minutes to display the tire inflation pressure after the “START
STOP ENGINE” <“POWER”> switch is turned to IGNITION ON <ON> mode. It
may also take a few minutes to display the tire inflation pressure after inflation pres-
sure has been adjusted.
● “---” may be displayed if the tire position information cannot be determined due to
unfavorable radio wave conditions.
● Tire inflation pressure changes with temperature. The displayed values may also be
different from the values measured using a tire pressure gauge.
■ Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is character-
istic of liquid crystal displays, and there is no problem continuing to use the display.
■ Customization
Setting of available languages can be changed. (Customizable features P. 862)
To Next Page
Loading...
