158
ES350_300h_OM_OM33A60U_(U)
3-3. Adjusting the seats
■ Recall procedure
Check that the shift lever is in P.
Turn the “START STOP ENGINE” <“POWER”> switch to IGNI-
TION ON <ON> mode.
Press one of the buttons for the
driving position you want to
recall until the buzzer sounds.
■ To stop the position recall operation part-way through
Perform any of the following:
● Press the “SET” button.
● Press button “1”, “2” or “3”.
● Operate any of the seat adjustment switches (only cancels seat position recall).
● Operate the tilt and telescopic steering control switch (only cancels steering wheel
position recall).
■ Seat positions that can be memorized (P. 154)
The adjusted positions other than the position adjusted by lumbar support switch can
be recorded.
To Next Page
Loading...
