ES350_300h_OM_OM33A60U_(U)
641
5-7. Other interior features
5
Interior features
■ Reprogramming a single HomeLink
®
button
When the following procedure is performed, buttons which already
have devices registered to them can be overwritten:
With one hand, press and hold the desired HomeLink
®
button.
When the HomeLink
®
indicator starts flashing, continue to hold the
HomeLink
®
button and perform “Programming HomeLink
®
” from
(it takes 20 seconds for the HomeLink
®
indicator to start flash-
ing).
Press and hold the 2 outside buttons
shown in the illustration for 10 sec-
onds until the indicator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
®
memory.
Erasing the entire HomeLink
®
memory (all three programs)
1
2