782
7-2. Steps to take in an emergency
ES350_300h_OM_OM33A60U_(U)
A warning message is shown on the multi-information display. After taking
the specified steps to correct the suspected problem, check that the
warning message goes off.
Follow the correction procedures.
Warning message Details Correction procedure
Indicates that the Auto-
matic High Beam switch
is pressed while the head-
lights are in low beam.
Turn the high beam on
and press the Automatic
High Beam switch again.
Indicates that the washer
fluid level is low
Add washer fluid.
Indicates that all mainte-
nance according to the
driven distance on the
maintenance schedule
*
should be performed
soon.
If necessary, perform
maintenance.
Comes on approxi-
mately 4500 miles
(7200 km) after the
maintenance data has
been reset.
To Next Page
Loading...
