Lexus ES350 - Page 813

812
7-2. Steps to take in an emergency
ES350_300h_OM_OM33A60U_(U)
■ Stopping the engine <hybrid system>
Shift the shift lever to P and press the “START STOP ENGINE” <“POWER”> switch
as you normally do when stopping the engine <hybrid system>.
■ Replacing the key battery
As the above procedure is a temporary measure, it is recommended that the elec-
tronic key battery be replaced immediately when the battery is depleted. (P. 719)
■ Changing “START STOP ENGINE” <“POWER”> switch modes
Release the brake pedal and press the “START STOP ENGINE” <“POWER”> switch
in step above.
The engine <hybrid system> does not start and modes will be changed each time the
switch is pressed. (P. 202, 209)
■ When the electronic key does not work properly
● Make sure that the smart access system with push-button start has not been deac-
tivated in the customization setting. If it is off, turn the function on.
(Customizable features P. 862)
● Check if battery-saving mode is set. If it is set, cancel the function. (P. 131)
3