ES350_300h_OM_OM33A60U_(U)
97
2. Instrument cluster
2
Instrument cluster
■ The meters and display illuminate when
The “START STOP ENGINE” <“POWER”> switch is in IGNITION ON <ON>
mode.
■ Instrument panel brightness adjustment
The instrument panel brightness levels when the tail lights are on and off can be
adjusted individually. However, when the surroundings are bright (daytime, etc.),
turning on the tail lights will not change the instrument panel brightness. At this time,
any adjustments made to the instrument panel brightness levels will be applied to
both settings at once.
■ Limitation of brightness adjustment
The brightness of the instrument panel lights is automatically adjusted based on the
light sensor detecting how bright the surroundings are. However, if the instrument
panel brightness has been manually set to either the brightest or darkest setting, the
automatic adjustment will not be performed.
To Next Page
Loading...
