184
2-1. Driving procedures
LX570_OM_OM60L96U_(U)
Changing shift range in “D” position
■ Shift lever
If the shift lever is shifted into the “D” position, the appropriate gear is
automatically selected, as determined by the driving conditions.
■ Paddle shift switches (if equipped)
While the shift lever is in the “D” position, engine braking force can be
temporarily switched to.
By firstly operating the “-” paddle shift switch, the “-” and “+” switches
can be used to freely switch the shift range.
Changing the shift range allows restriction of the highest gear, pre-
venting unnecessary upshifting and enabling the level of engine brak-
ing force to be selected.
Downshifting
Upshifting
To return to normal D position
driving, the “+” paddle shift switch
must be held down for a period of
time.
To Next Page
Loading...
