629
3-5. Using the hands-free system (for cellular phone)
3
Interior features
LX570_OM_OM60L96U_(U)
■ Reconnecting to the Bluetooth
®
phone
If the system cannot connect due to poor signal strength with the “ENGINE START
STOP” switch in ACCESSORY or IGNITION ON mode, the system will automat-
ically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this case, it
must be connected manually, or the phone must be re-selected or re-entered.
■ Connecting the phone while Bluetooth
®
audio is playing
● Bluetooth
®
audio will stop temporarily.
● It may take time to connect.
■ Connecting the phone while another Bluetooth
®
device is connected
When another Bluetooth
®
device is currently connected, a confirmation message
will be displayed. To disconnect the Bluetooth
®
device, touch “Yes”.
■ Connecting the phone while 5 Bluetooth
®
devices have already been registered
When 5 Bluetooth
®
devices have already been registered, a registered device
needs to be deleted. Touch “Yes” to delete one or more.
Touch the device to be deleted, then touch “Remove”, and “Yes”.
■ If the Bluetooth
®
phone has a Bluetooth
®
audio function
When the Bluetooth
®
phone to be registered has a Bluetooth
®
audio function, this
audio function will be registered automatically at the same time and confirmation
message may be displayed. If this screen is displayed, touch “Yes” to connect the
audio function or touch “No” to cancel the connection.
To Next Page
Loading...
