391
2-5. Driving information
2
When driving
LX570_OM_OM60L96U_(U)
Connecting and disconnecting a trailer
Stop your vehicle and a trailer in line and perform the following:
● Connecting a trailer
Put the 4-Wheel AHC in the “LO” (low) mode.
Turn off the “ENGINE START STOP” switch or the 4-Wheel
AHC.
Connect a trailer.
Turn on the “ENGINE START STOP” switch or the 4-Wheel
AHC.
Select the “N” (normal) mode with the height select switch.
When a vehicle loaded with four occupants tows a trailer of about
4000 lb. (1800 kg) with more than about 400 lb. (180 kg) tongue
load, the normal mode may not be selected. However, there is no prob-
lem to continue normal driving. Drive with sufficient care because of
large load.
STEP 1
STEP 2
STEP 3
To Next Page
Loading...
