■ Back door damper stays
The back door is equipped with damper stays that hold the back door in place.
Observe the following precautions.
Failure to do so may cause damage to the back door damper stay, resulting in mal-
function.
■ To prevent back door closer malfunction
Do not apply excessive force to the back door while the back door closer is operat-
ing.
■ To prevent damage to the power back door
● Make sure that there is no ice between the back door and frame that would pre-
vent movement of the back door. Operating the power back door when exces-
sive load is present on the back door may cause a malfunction.
● Do not apply excessive force to the back door while the power back door is
operating.
● Take care not to damage the sensors (installed on the right and left edges of the
power back door) with a knife or other sharp object. If the sensor is disconnected,
the power back door will not operate in automatic operation.
● Do not attach any foreign objects, such as
stickers, plastic sheets, or adhesives to the
damper stay rod.
● Do not touch the damper stay rod with
gloves or other fabric items.
● Do not attach any accessories other than
genuine Lexus parts to the back door.
● Do not place your hand on the damper stay
or apply lateral forces to it.
To Next Page
Loading...
