■ Multi-terrain Select control starting conditions
When all of the following conditions are satisfied, the Multi-terrain
Select indicator will come on, the mode select screen will be dis-
played on the multi-information display, and Multi-terrain Select
control will begin.
● The four-wheel drive control switch is in “L4”.
● Both Active TRAC and VSC are not off.
● Crawl Control is off.
■ Switching modes
Operate the Multi-terrain
Select mode select switch dur-
ing Multi-terrain Select control
to select a mode.
Once the mode is confirmed,
the mode name will be dis-
played and the control will
switch.
To Next Page
Loading...
