135
3-2. Opening, closing and locking the doors
3
Operation of each component
NX200t_OM_USA_OM78145U
■ When the vehicle is not driven for extended periods
● To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the
vehicle.
● The smart access system with push-button start can be deactivated in advance.
(→P. 638)
■ To operate the system properly
Make sure to carry the electronic key when operating the system. Do not get the elec-
tronic key too close to the vehicle when operating the system from the outside of the
vehicle.
Depending on the position and holding condition of the electronic key, the key may not
be detected correctly and the system may not operate properly. (The alarm may go off
accidentally, or the door lock prevention may not operate.)
■ If the smart access system with push-button start does not operate properly
● Locking and unlocking the doors: Use the mechanical key. (→P. 597)
● Starting the engine: →P. 599
■ Customization
Settings (e.g. smart access system with push-button start) can be changed.
(Customizable features: →P. 636)
■ If the smart access system with push-button start has been deactivated in a customized
setting
● Locking and unlocking the doors:
Use the wireless remote control or mechanical key. (→P. 114, 597)
● Starting the engine and changing engine switch modes: →P. 599
● Stopping the engine: →P. 193
To Next Page
Loading...
Need help?
General
