354
5-4. Using the radio
NX200t_OM_USA_OM78145U
Radio operation
Pressing the “RADIO” button displays the radio top screen from any screen of
the selected source.
■ Menu screen
→P. 350
Tune in to the desired station using one of the following methods.
■ Seek tuning
Press and hold then release “<” or “>” on the “PRST•TRACK” button.
Seek tuning can also be operated on the menu screen. (→P. 350)
The radio will begin seeking up or down for a station of the nearest frequency
and will stop when a station is found.
■ Manual tuning
Turn the “TUNE•SCROLL” knob.
■ Preset stations
Select the desired preset station by pressing “<” or “>” on the “PRST•TRACK”
button, or turning and pressing the controller.
■ Station list
Move the controller to the right and selecting “Station List”.
AM radio: Selecting a desired station.
FM radio: Selecting a desired type of station and selecting a desired sta-
tion.
To refreshing the station list, select “Refresh”. Select “Source” on the refresh
screen, can be change to the other audio source while refreshing.
Select “AM”, “FM” or “SAT” on the audio source selection screen to begin lis-
tening to the radio.
Radio top screen
Selecting a station (AM or FM radio)
To Next Page
Loading...
Need help?
General
