Lexus NX 200t - Bluetooth; What to Do if; (Troubleshooting)

414
5-11. Bluetooth
®
NX200t_OM_USA_OM78145U
What to do if... (Troubleshooting)
If there is a problem with the hands-free system or a Bluetooth
®
device, first
check the table below.
 When using the hands-free system with a Bluetooth
®
device
 When registering/connecting a cellular phone
The hands-free system or Bluetooth
®
device does not work.
The connected device may not be a compatible Bluetooth
®
cellular phone.
→ For a list of specific devices which operation has been confirmed on this system,
check with your Lexus dealer or the following website:
http://www.lexus.com/MobileLink
The Bluetooth
®
version of the connected cellular phone may be older than the speci-
fied version.
→ Use a cellular phone with Bluetooth
®
version 2.0 or higher (recommended: Ver.
3.0 with EDR or higher). (→P. 419)
A cellular phone cannot be registered.
An incorrect passcode was entered on the cellular phone.
→ Enter the correct passcode on the cellular phone.
The registration operation has not been completed on the cellular phone side.
→ Complete the registration operation on the cellular phone (approve registration
on the phone).
Old registration information remains on either this system or the cellular phone.
→ Delete the existing registration information from both this system and the cellu-
lar phone, then register the cellular phone you wish to connect to this system.
(→P. 380)
A Bluetooth
®
connection cannot be made.
Another Bluetooth
®
device is already connected.
→ Manually connect the cellular phone you wish to use to this system. (→P. 383)
Bluetooth
®
function is not enabled on the cellular phone.
→ Enable the Bluetooth
®
function on the cellular phone.