215
4-3. Operating the lights and wipers
4
Driving
NX200t_OM_USA_OM78145U
Automatic High Beam
∗
Push the lever away from you with
the headlight switch in or
position.
Press the Automatic High Beam
switch.
The Automatic High Beam indicator will
come on when the headlights are turned
on automatically to indicate that the sys-
tem is active.
∗: If equipped
The Automatic High Beam uses an in-vehicle camera sensor to assess the
brightness of streetlights, the lights of oncoming and preceding vehicles, etc.,
and automatically turns high beam on or off as necessary.
Activating the Automatic High Beam system
To Next Page
Loading...
