139
3-3. Adjusting the seats
3
Operation of each component
NX200t_OM_USA_OM78145U
■ Before folding down the rear seatbacks
Stow the rear center seat belt and seat belt buckles. (→P. 32)
Lower the head restraint of the rear seat. (→P. 149)
■ Folding down rear seatbacks (manual seat)
Pull the seatback angle adjustment
lever and fold down the seatback.
■ Folding down rear seatbacks (power seat)
Press and hold the switch to fold down the seatback.
The buzzer sounds and operations start. The buzzer sounds again when the operation
is complete.
To stop the operation of a seat partway, press either seat operation switch for that
seat, once more. Switches for that seat in other locations can be used to stop the
operations. (buzzer sounds depending on stopping position of the seatback)
Folding down the rear seatbacks
Instrument panel switch Rear seat switch
When the seatback is collapsed to the
rear, put the seatback in the most
upright position and press the switch
once again.
To Next Page
Loading...
Need help?
General
