200
4-2. Driving procedures
NX200t_OM_USA_OM78145U
To enter M mode, shift the shift lever to M. Gears can then be selected by oper-
ating the shift lever or paddle shift switches, allowing you to drive in the gear of
your choice. The gear can be selected by operating the shift lever or the “-” and
“+” paddle shift switches (if equipped).
Upshifting
Downshifting
The gear changes once every time the
shift lever or paddle shift switch is oper-
ated.
The selected gear, from 1 to 6, will be
fixed and displayed on the multi-infor-
mation display.
When in the M position, the gear will not change unless the shift lever or pad-
dle shift switches are operated.
However, even when in the M position, the gears will be automatically
changed in the following situation:
● When vehicle speed drops (downshift only).
● When the accelerator pedal is depressed further, while driving (downshift
only).
● When the needle of the tachometer is in the red zone (the range which
exceeds the allowable revs of the engine).
Selecting gears in the M position
1
2
To Next Page
Loading...
Need help?
General
