EasyManuals Logo

Lexus NX 200t User Manual

Lexus NX 200t
681 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #253 background imageLoading...
Page #253 background image
253
4-5. Using the driving support systems
4
Driving
NX200t_OM_USA_OM78145U
Dynamic radar cruise control with full-speed range can be set when
The shift lever is in D.
Vehicle speed is above approximately 30 mph (50 km/h).
Accelerating after setting the vehicle speed
The vehicle can accelerate by operating the accelerator pedal. After accelerating, the
set speed resumes. However, during vehicle-to-vehicle distance control mode, the vehi-
cle speed may decrease below the set speed in order to maintain the distance to the pre-
ceding vehicle.
Automatic cancelation of vehicle-to-vehicle distance control mode
Vehicle-to-vehicle distance control mode is automatically canceled in the following situ-
ations:
VSC is activated.
TRAC is activated for a period of time.
When the VSC or TRAC system is turned off by pressing the VSC OFF switch.
The sensor cannot detect properly because it is obstructed in some way.
Brake automatically operated for long periods of time, such as traffic jams, etc.
The parking brake is operated.
The vehicle is stopped by system control on a steep incline.
Pre-collision braking is activated.
The following are detected when the vehicle has been stopped by system control:
The driver is not wearing a seat belt.
The driver’s door is opened.
The back door or hood is opened.
When vehicle-to-vehicle distance control mode is automatically canceled in the follow-
ing situations, “Radar Cruise Control Unavailable” will be displayed on the multi-infor-
mation display:
Actual vehicle speed falls below approximately 25 mph (40 km/h) when there are no
vehicles ahead.
The preceding vehicle leaves the lane when your vehicle is following at a vehicle speed
below 25 mph (40 km/h). Otherwise, the sensor cannot properly detect the vehicle.
The windshield wipers are operating at high speed (when the wiper switch is set to the
“AUTO” mode or the high speed wiper operation position).
If vehicle-to-vehicle distance control mode is automatically canceled for any other rea-
son, there may be a malfunction in the system. Contact your Lexus dealer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexus NX 200t and is the answer not in the manual?

Lexus NX 200t Specifications

General IconGeneral
BrandLexus
ModelNX 200t
CategoryAutomobile
LanguageEnglish

Related product manuals